What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 30.06.2025 13:35
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This one hit behind the barn.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
what exactly is a ‘surge’ protector?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But it can get overloaded, and no longer works.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
What does a fuse do?
There are three different concepts here that are getting confused.
Barnstars:
eight
Samsung is giving these Galaxy phones a big One UI upgrade - here's which models qualify - ZDNET
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The bolt then partially travels down the line to your home.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Red Sox To Acquire Jorge Alcala - MLB Trade Rumors
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
[image of Common-mode choke]
This device then solves the entire problem.
What is your favourite colour and why?
The other is “what does a “fuse” do?”
This is 'the assistant's answer'
It seems Mohan does not understand the difference between a comment and an Answer.
'King of the Hill' Reboot First Details: Hank, Peggy, Bobby, Dale - Variety
First Sentence:
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Because the load is inductive, the current lags the voltage.(by a bit).
Dear Doctor: What are the best ways to help my kidneys recover from nearly failing? - OregonLive.com
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Edit 2024–10.
the problem then depends on "how fast does the fuse operate?".
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then asserts :
Why do SpaceX rockets keep exploding? - The Verge
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
(Dc diagram shown, AC is similar).
An AC voltage/ current source, and an ac inductive load.
Who was the actor least deserving of an Academy Award?
The MOV will conduct when the voltage exceeds 50% of line voltage.
So, the voltage could go up to 500 volts, and the fuse will not open up.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
NASA robot for drilling on icy moons tested on Alaskan glacier - Ars Technica
It also is a device that limits the change in current flow.
Now when you have a certain ac resistance, then a current flows in a loop.
One
China fast tracks rare earth export licences for European companies - Financial Times
One is “what exactly is in a ‘surge protector’ ? ”
A fuse is a non-resetable over current circuit protector.
so, what happens?
a photo is worth a thousand words.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
At least they know the answer if they wanted it.
What is lightning?
The third is lightning and “how it gets conducted into a home.”
but this device (an Inductor) … impedes the rapid changes in the current.
This is where this question deviates from being a 'generic' question, and becomes more specific.
These devices are installed between the “hot” and “neutral” and protective ground.
There are two important concepts here.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Upvotes:
For this case there are devices called Metal oxide varistors (MOV).
This is where the MOV conducts again, and dissipated the energy.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
These are simplified answers to the original question, and does not change anything I wrote above.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Here is a simplified AC power diagram.
I post the exact comment here.
nine
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
He then describes Rainy Season and Lightning.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–10[John johnson John Johnson ]
At one ohm, the resistor has a maximum of 1 watt power.
In schematic diagrams this is the symbol for a fuse:
A circuit breaker is similar, but is resettable.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
[old diagram got deleted by accident]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
He then describes the function of a fuse.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
but I think this circuit , shows a few more pieces.